HP B3000 Guide d'installation télécharger pdf (Page 7)

[Enter your Document Title]

[Document Restriction Notice]

SAN Connection

Tool

The SAN Connection Tool is a utility which configures the nodes for connection to a

StorageWorks SAN. The SAN Connection tool is accessible through the WEBUI and

must be completed after the Rapid Startup utility. No Fiber cables should be connected

to the node at this time and the nodes should remain unconnected until after the SAN

Connection Tool process is completed.

From a remote node, click on the Internet Explorer icon in the fast start tray. Navigate to

http://hostname:3201. A prompt for a username and password will appear. The user

name is administrator, the password should be null if this is a new install (the password

is the same password that is used for the local administrator account on the server).

Verify that no fiber cables are connected to the HBAs.

The StorageWorks NAS b3000 v1 uses the HP StorageWorks Modular SAN

Array 1000 (MSA1000) storage subsystem.

Connecting to MSA1000

1. Open lputilnt from a run command and verify that the HBA driver is 5-4.82a9

and the firmware is 3.81a1

2. Select Next and the tool will install the necessary components

3. Secure path v3.1b will be installed with this utility.

NOTE

: Make sure to do this on both nodes before continuing.

IMPORTANT: Connect the NAS system(s) to the MSA1000 Storage subsystem at this

time.

Patching SWVR

in a non-

clustered

architecture

This section is for a stand-alone architecture. If the b3000 is to be clustered skip to the

next section entitled “Installing Cluster Services”.

The only patch required is the Compaq SANworks Virtual Replicator Update. (SoftPaq

2829)

http://h18006.www1.hp.com/support/files/server/us/download/16247.html

Installation Instructions for stand-alone systems:

1. Place the Smart Component in a temporary directory on the NAS system, then double-

click it to run.

2. Click 'Install' at the Compaq Package Setup screen.

3. Click 'Install' at the Compaq Setup screen.

4. All the necessary files will be extracted to C:\CP002829.

5. Browse to "C:\Winnt\System32\Drivers."

6. Rename the file CPQVRBus.sys to CPQVRBus.sys.bak.

7. Copy the file "C:\CP002829\CPQVRBus.sys" to the directory

"C:\Winnt\System32\Drivers."

8. Browse to "C:\Program Files\Compaq\SANWorks Virtual Replicator 2.5\WDM"

9. Rename the file CPQVRBus.sys to CPQVRBus.sys.bak.

10. Copy the file "C:\CP002829\CPQVRBus.sys" to the directory C:\Program

Files\Compaq\SANWorks Virtual Replicator 2.5\WDM"

11. Browse to "C:\Winnt\System32."

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

HP B3000 Guide d'installation Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP B3000