HP MT40 Guide de dépannage télécharger pdf (Page 17)

HP Velocity FAQ and Troubleshooting Guide 17

HP Velocity FAQ Protected flows

All HP Velocity data flows are blocked

In IP headers, HP Velocity uses the Internet Protocol (IP) ID value 0x420B and the IP option

0x880477FB. In TCP headers, HP Velocity uses the TCP option

0x01000000 & 0x00000000.

Intrusion Detection Systems (IDS) and firewall systems may require configuration to support

HP Velocity-enabled traffic. Failure to do so may result in these devices blocking HP Velocity-

enabled traffic. Consult your device manuals to configure these settings.

Traffic between HP Velocity servers is only monitored

HP Velocity protects only the flows between HP thin clients and HP Velocity-enabled servers

(virtual desktops or terminal services). For server-to-server connections, HP Velocity displays

the green icon but will only be monitoring the flows.

An RDP connection is not established to Microsoft Hyper-V when HP Velocity is

enabled (Protect or Monitor mode)

If HP Velocity is installed directly on Microsoft Hyper-V and there is a “Local Area Connection -

Virtual Network” entry (Figure 1), ensure that the LiveQoS NDIS 6 Filter Driver is disabled for

the physical network adapter (Figure 2).

Figure 1. Microsoft Hyper-V network connections

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Pas de commentaire

HP MT40 Guide de dépannage Page 17