HP T1453-90001 Manuel d'utilisateur télécharger pdf (Page 48)

Using lanadmin -V to Administer VLANs

Using the lanadmin -V Command for Administering VLANs

Chapter 548

Using the lanadmin -V Command for

Administering VLANs

To conﬁgure VLANs, you use either the GUI-based system admin

manager (SAM) or edit the conﬁguration ﬁle with an editor. VLAN

conﬁguration doesn’t require a reboot to take effect. If you use SAM, your

conﬁgurations will be preserved after reboots in a conﬁguration ﬁle

called /etc/rc.conﬁg.d/vlanconf.

If you use the lanadmin command line interface, your conﬁguration will

not be preserved after reboots unless you also save the conﬁguration in

the vlanconf ﬁle by either using SAM or editing it. See “Modifying

Parameters in vlanconf File” in this document for the format of the

/etc/rc.conﬁg.d/vlanconf ﬁle.

lanadmin Syntax

If you use the lanadmin command line interface to work with VLANs,

you can display the general usage string by typing:

lanadmin -V help

General usage string:

lanadmin -V create vlanid <vlanid> (range 0-4094)

[pri <priority> (range 0 - 7, default 0)]

[tos <ToS value> (range 0-255, default 0)]

[vppa <vppa>]

[name <name> (31 characters alphanumeric

string)]

[tos_override <level>(IP_HEADER, ETHER_HEADER,

CONF_TOS or CONF_PRI,

default IP_HEADER)]

[pri_override <level>(CONF_PRI,IP_HEADER

or CONF_TOS, default CONF_PRI)] <ppa>

-V delete <vppa>

-V modify [vlanid <vlanid> (range 0-4094)]

[pri <priority> (range 0 - 7)]

[tos <ToS value> (range 0-255)]

[name <name> (31 characters alpha numeric

string]

[tos_override <level>(IP_HEADER, ETHER_HEADER,

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 77 78

Pas de commentaire

HP T1453-90001 Manuel d'utilisateur Page 48