HP VMA-series Memory Arrays Manuel d'utilisateur télécharger pdf (Page 13)

j. Now that you have established serial communication with the VMA Array and logged

in to the CLI, determine the configured IP address of the Array Ethernet management port.

Enter the following command at the prompt:

show chassis controller ethernet 0

In the example above, the IP address of the VMA Array is still using the factory default

IP address of 192.168.1.2. If your VMA Array has previously been configured and in

use, you will likely have a different IP address established.

k. Write down both the IP address and the gateway IP address currently configured on the

VMA Array for later use.

Configuring the Laptop to communicate with the VMA Array 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

Pas de commentaire

HP VMA-series Memory Arrays Manuel d'utilisateur Page 13