HP Compaq dc7900 USDT Spécifications Page 121

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 300
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 120
System Board
1. Prepare the computer for disassembly (Preparation for Disassembly on page 63).
2. When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
Memory modules
Expansion boards
Processor
3. Remove the computer access panel (
Computer Access Panel on page 70).
4. Remove all expansion boards (
Expansion Cards on page 79).
5. Disconnect all cables connected to the system board, noting their location for reinstallation.
6. Remove the heatsink (
Heatsink on page 104).
7. Remove the 10 screws that secure the system board to the chassis.
8. Slide the system board toward the front of the computer so that the connectors loosen from the
rear of the chassis.
9. Lift the system board out of the computer.
Figure 7-54 Removing the system board
NOTE: When replacing the system board, you must also change the chassis serial number in the
BIOS.
System Board 109
Vue de la page 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 299 300

Commentaires sur ces manuels

Pas de commentaire