HP NetServer LH 3/LH Guide d'installation télécharger pdf (Page 14)

Chapter 1 Processor Module Installation

Removing the HP NetServer LH 3r System Board

Remove the system board from the NetServer chassis to upgrade the processor

modules. The system board is secured to the chassis by two retaining latches (see

Figure 1-7).

System Board

Retaining Latches

Figure 1-7. HP NetServer LH 3r System Board

1. Lift the retaining latches to release the system board from its socket.

2. Lift the system board out of the NetServer, and place it component side up

on the anti-static mat. Lay the system board flat, with the metal crosspiece

on the top rear corner of the system board extending off the work surface

(see Figure 1-8).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Pas de commentaire

HP NetServer LH 3/LH Guide d'installation Page 14