HP Visualize b2000 - Workstation Spécifications télécharger pdf (Page 104)

104 Chapter4

Changing Your Workstation’s Hardware Conﬁguration

Removable Media Devices

4. Remove both ﬂoppy disk bracket screws (T-15 Torx/slotted screws)

and pull the ﬂoppy disk bracket out of the chassis assembly as shown

in Figure 4-25. Next remove the four ﬂoppy disk blank ﬁller screws

(T-15 Torx/slotted screws) as shown in Figure 4-25 and remove the

blank from the bracket. You are now ready to mount the ﬂoppy disk

drive into the ﬂoppy disk bracket.

Figure 4-25 Removing the Floppy Disk Bracket and Blank

CAUTION Floppy disk drives are susceptible to mechanical and electronic shock.

When handling the drive, always wear the static-grounding wrist strap

that came in the ﬂoppy disk drive kit. Always handle the drive carefully.

Blank Filler Screws

Bracket

Screw

Blank

Bracket

(T-15 Torx Screws)

Blank Screw

(T-15 Torx Screw)

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 228 229

Pas de commentaire

HP Visualize b2000 - Workstation Spécifications Page 104