HP 076064 REV C Manuel d'utilisateur télécharger pdf (Page 25)

Unpacking and Assembly 1-13

Power-Up Sequence

Turn on the power switch to observe the typical power-up

sequence:

1. The control panel backlight illuminates. Move the contrast

lever (located to the right of the control panel screen) up and

down until the control panel graphics and messages are easily

visible.

2. The printer runs a series of self-tests, and reports any errors it

finds.

3. The camera searches for the location of the installed media’s

home and far edges. If media is installed, this data tells the

printer the width of the installed media. If no media is installed,

the printer will prompt the user to load media when the next

print job is sent to the printer.

4. The control panel displays the following message:

Ready

What’s Next?

◆

To familiarize yourself with the printer, refer to the remain-

der of this chapter.

◆

To proceed with installation, see Chapter 3, Installing Ink

and Media.

◆

For a complete description of using the control panel, see

Chapter 2, Using the Control Panel.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 97 98

Pas de commentaire

HP 076064 REV C Manuel d'utilisateur Page 25