HP EN Series Guide de l'utilisateur Page 182

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 278
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 181
180 Chapter 11 Troubleshooting the print server
EN
Error messages
Error Code and Message Description
02 LAN ERROR
INTERNAL LOOPBACK
During a self-test, the print server detected an internal
loopback test error. The print server might be faulty. If the error
persists, replace the print server.
03 LAN ERROR
EXTERNAL LOOPBACK
The print server is incorrectly connected to your network or it
is defective. Make sure that your print server is correctly
attached to your network. In addition, check the cabling and
connectors.
07 LAN ERROR
CONTROLLER CHIP
Check the network connections. If the connections are intact,
run the power-on self-test: turn the printer off and back on. If
the error persists, replace the print server.
08 LAN ERROR INFINITE
DEFERRAL
There is a network congestion problem.
Note
If the print server is not connected to the network, this error
cannot occur.
09 LAN ERROR BABBLE Check the network connections. If the connections are intact,
run the power-on self-test: turn the printer off and back on. If
the error persists, replace the print server.
0A LAN ERROR NO SQE Check the network connections. If the connections are intact,
run the power-on self-test: turn the printer off and back on. If
the error persists, replace the print server.
0C LAN ERROR
RECEIVER OFF
There might be a problem with your network cabling or the
print server. Check the cabling and connectors on your
Ethernet network. If you cannot find a problem with your
network cabling, run the power-on self-test: remove and
re-attach the power module connector on the print server. If
the error persists, there is a problem with the print server.
Vue de la page 181
1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 277 278

Commentaires sur ces manuels

Pas de commentaire