HP 600N Manuel d'installation télécharger pdf (Page 33)

Control Panel Configuration 3-7

Control Panel

Configuration

3. Press [Item] until CFG NETWORK=NO* appears.

NO* indicates that access to the EIO JetDirect network menus

will be bypassed. You must change this to CFG NETWORK=YES* to

access the EIO JetDirect menus:

a. Press [Value]. CFG NETWORK=YES appears.

b. Press [Select]. CFG NETWORK=YES* appears.

4. Press [Item] to scroll through each network protocol until

CFG IPX/SPX=NO* is displayed.

To access the IPX/SPX configuration menu, press [Value] and

then press [Select] to display CFG IPX/SPX=YES*.

5. Press [Item] until SRC RC=<Source Routing>* appears.

6. To activate the printer and save your changes, press [Go].

AUTO

OFF

SINGLE R

ALL RT

●

To change the selection, press

[Value]

until the

desired option appears, and then press

[Select]

●

Press

[Item]

to continue to the next parameter.

Note:

An asterisk (*) indicates the active source-routing selection.

S00eiohw.book Page 7 Thursday, February 24, 2000 2:26 PM

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 53 54

Pas de commentaire

HP 600N Manuel d'installation Page 33