HP Access Control Guide de démarrage rapide télécharger pdf (Page 40)

5.1 Scan the network for printers

To scan the network for single-function printers, multi-function devices, and XT devices, the following is

required:

●

Printers and devices must be turned on and connected to the network.

●

A device administrator user name and password must be entered in the Settings tile > Device tab.

In the Devices tile, go to the Devices menu and select Snmp discovery or IP range.

●

Snmp discovery sends a broadcast over the network and discovers available devices.

●

IP range scans for devices within a selected range of IP addresses. In the IP Range window, enter IP

addresses in the Start and End fields. Then click Start to scan the network.

Figure 5-5 IP range

TIP: To scan multiple IP ranges at once, enter an IP range in the Start and End fields, then click Add. Add

multiple IP ranges to the list. Click Save to save the IP range list. Click Load to load a previously saved IP

range list.

The progress of the scan displays in the status section at the bottom, and device data appears in the device

list.

32 Chapter 5 Devices tile

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 70 71

Pas de commentaire

HP Access Control Guide de démarrage rapide Page 40