HP Jetdirect 170x External Ethernet Print Server Manuel d'installation

HP JetDirect External Print Servers 300X, 500X, 170X, EX PlusHardware Installation GuideHPJetDirectPrint Servers

1-4 Product OverviewComponents and FeaturesHP JetDirect 300X (J3263A):●Bidirectional parallel port (IEEE 1284).●Network port (Ethernet or Fast Etherne

Product Overview 1-5Product Overview1

1-6 Product OverviewTransmission MediaIEEE 802.3 Ethernet10Base2 Thin coaxial cable with BNC connector.IEEE 802.3 Ethernet10Base-T Four pairs of unshi

Product Overview 1-7Product Overview1Hardware RequirementsHP JetDirect 300XJ3263A (Ethernet 10Base-T or 100Base-TX)HP JetDirect 170XJ3258B (Ethernet 1

1-8 Product OverviewLEDsOn the top of the print server are Status and LAN Activity LEDs:Between the Status and LAN Activity LEDs is the Test button, u

Product Overview 1-9Product Overview1Switches (HP JetDirect 300X and 500X)The HP JetDirect 300Xand 500X Print Servers have configuration switches that

1-10 Product Overview

2-12Hardware InstallationTo install the HP JetDirect external print servers, you need to complete these steps. ●Verify that your printer parallel port

2-2 Hardware Installation4.For the 300X or 500X Ethernet print servers (J3263A or J3265A), verify that the auto-negotiation switches are in their defa

Hardware Installation 2-3HardwareInstallation28.Plug the power module into the wall outlet ➐. Since there is no power switch, the print server is swit

2-4 Hardware InstallationIf you want to change the detected printer language, use the LEDs and Test button to select a PDL for the configuration page.

A-1ASpecificationsPhysical SpecificationsProduct NumberWidth Height Depth* WeightJ2591A 178 mm(7.0 in.)31 mm(1.2 in.)124 mm(4.9 in.)269 g(0.59 lbs.)J3

A-2 SpecificationsPower RequirementsPower Modules for J3264A and J3265ANote: If two parts are listed for one country/region, either part can be used.C

Specifications A-3SpecificationsAPower Modules for J2591A, J3263A, and J3258B Note: If two parts are listed for one country/region, either part can be

A-4 SpecificationsEnvironmentalAcoustic NoiseNot applicableElectromagnetic EmissionsFCC part 15 Class A (U.S.A.), ICES-003 (Canada), VCCI Class 1 (in

B-1BRegulatory StatementsFCC Statement (U.S.A)This equipment has been tested and found to comply with the limits for a Class A digital device, pursuan

B-2 Regulatory StatementsDeclaration of ConformityThe following Declaration complies with ISO/IEC Guide 22 and EN 45014. It identifies the product, th

Regulatory Statements B-3RegulatoryStatementsBAustralia. This equipment complies with Australian EMC requirements.Canada. Complies with Canadian EMC

B-4 Regulatory StatementsChinese Safety Statement:

Hardware Installation GuideHP JetDirect ExternalPrint Servers

©Copyright 2014 Hewlett-Packard Company 8/99Manual Part Number 5969-3466*5969-3466*

©Copyright Hewlett-Packard Company 2014. All rights reserved.Reproduction, adaptation or translation without prior written permission is prohibited, e

3Contents1 Product OverviewSupported Printers, Plotters, and HP All-in-One Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

1-11Product OverviewThis hardware guide covers the following Hewlett-Packard print servers:These print servers send data to printers at speeds of up t

1-2 Product OverviewThe HP JetDirect 300X provides connectivity to 10Base-T and 100Base-TX networks. The HP JetDirect 170X provides connectivity to 10

Product Overview 1-3Product Overview1Network ManagementThe HP JetDirect external print servers support the Simple Network Management Protocol (SNMP),