HP Jetdirect 175x Guide de l'utilisateur télécharger pdf (Page 118)

After about 3 seconds, the power/status LED changes to amber. Continue to hold the

button until the power/status LED

is flashing green. Then release the button.

b. Briefly press and release the test

button once again to request the configuration page

in the next language.

c. Verify that a readable page is printed. Repeat these steps up to four times if necessary to

receive a configuration page you can read.

If you still cannot read the page, refer to your printer documentation to find out which of the

following 4 printer languages are supported by your printer:

❍ ASCII

❍ PCL

❍ PostScript

❍ HP/GL-2

5. If you cannot read the language printed on the page and you could read English, French, Italian,

German, or Spanish, you can request the configuration page be printed in those 5 languages:

Press the print server’s test

button three times and on the third press, hold it for two seconds.

A page for each of the 5 languages will emerge from the printer.

Note: the language printed on the page by default (when you press test

once, briefly) is

either determined by the control panel settings for the printer, or if that is not supported, English

is used.

6. It may be necessary to re-initialize the connection between the printer and the print server by

cycling power on the print server. (Unplug the power cable from the print server; then plug it

back in.) Do this with the printer switched ON.

Can you now print a readable Jetdirect configuration page?

If yes, click on the Yes button for information on interpreting the configuration page.

If no, your print server has a problem that requires assistance from HP Jetdirect technical support; click

on the No button for information on contacting HP.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 141 142

Pas de commentaire

HP Jetdirect 175x Guide de l'utilisateur Page 118