HP A4800A Manuel d'utilisateur télécharger pdf (Page 40)

Troubleshooting

Checking SCSI Bus Compatibility

Chapter 340

Setting SCSI IDs

To use the SCSI command to set the initiator (SCSI) ID for an adapter,

follow this syntax:

SCSI init

bus_number slot_number ID_number

where

bus_number

Speciﬁes the number of the bus the adapter is installed

on.

slot_number

Speciﬁes the number of the slot the adapter is in.

ID_num

Speciﬁes the adapter’s SCSI ID number.

For example, to set the SCSI ID for the adapter installed on bus 5 slot 2

to 6 and then display the results, issue these commands:

SCSI init 5 2 6

SCSI init 5 2

The output (of the second command) could look something like this:

PCI device /5.2 = 6

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 63 64

Pas de commentaire

HP A4800A Manuel d'utilisateur Page 40