HP D2200sb Manuel d'utilisateur télécharger pdf (Page 10)

Operations 10

IMPORTANT: If installing a hot-plug device, it is not necessary to power down the storage blade.

To power down the storage blade, power down the partner server blade. See the server blade

documentation.

Remove the storage blade

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: To prevent damage to electrical components, properly ground the storage blade

before beginning any installation procedure. Improper grounding can cause ESD.

To remove the component:

1. Identify the proper storage blade.

2. Power down the partner server blade (on page 9).

3. If the partner server blade is a full-height server blade, do one of the following:

o Remove the blank installed above the storage blade.

o Remove the half-height device installed above the storage blade.

For information about removing a half-height device, see the half-height device user guide.

4. Remove the storage blade:

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 48 49

Pas de commentaire

HP D2200sb Manuel d'utilisateur Page 10