HP PROCURVE 2520 Manuel d'utilisateur télécharger pdf (Page 397)

100

101

File Transfers

Transferring Switch Configurations

Xmodem: Copying a Software Image from the Switch to a

Serially Connected PC or UNIX Workstation

To use this method, the switch must be connected via the serial port to a PC

or UNIX workstation.

Syntax: copy flash xmodem < pc | unix >

Uses Xmodem to copy a designated configuration file from the

switch to a PC or Unix workstation.

For example, to copy the primary flash image to a serially connected PC:

1. Execute the following command:

Procurve# copy xmodem flash

Press ‘Enter’ and start XMODEM on your host...

2. After you see the above prompt, press

[Enter].

3. Execute the terminal emulator commands to begin the file transfer.

Transferring Switch Configurations

Transfer Features

Feature Page

Use TFTP to copy from a remote host to a config file. A-24

Use TFTP to copy a config file to a remote host. A-26

Use Xmodem to copy a configuration from a serially connected host to a config file. A-26

Use Xmodem to copy a config file to a serially connected host. A-26

Using the CLI commands described in this section, you can copy switch

configurations to and from a switch.

A-23

1 2 ... 392 393 394 395 396 397 398 399 400 401 402 ... 543 544

Commentaires sur ces manuels

Pas de commentaire

HP PROCURVE 2520 Manuel d'utilisateur Page 397

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel HP PROCURVE 2520