HP PROCURVE 2520 Manuel d'utilisateur télécharger pdf (Page 401)

100

101

File Transfers

Transferring Switch Configurations

Syntax: copy xmodem startup-config < pc | unix >

copy xmodem config < filename > < pc | unix >

Copies a configuration file from a serially connected PC or

UNIX workstation to a designated configuration file on the

switch. For more on multiple configuration files, refer to

“Multiple Configuration Files” on page 6-23

For example, to copy a configuration file from a PC serially connected to the

switch:

1. Execute the following command:

2. After you see the above prompt, press

[Enter].

3. Execute the terminal emulator commands to begin the file transfer.

4. When the download finishes, you must reboot the switch to implement

the newly downloaded software. To do so, use one of the following

commands:

Syntax: boot system flash [ primary | secondary ]

boot system flash [ config < filename >]

Switches boot from the designated configuration file. For more

on multiple configuration files, refer to “Multiple Configura-

tion Files” on page 6-23.

Syntax:

reload

Reboots from the flash image currently in use.

(For more on these commands, refer to “Rebooting the Switch” on page

6-18.)

A-27

1 2 ... 396 397 398 399 400 401 402 403 404 405 406 ... 543 544

Commentaires sur ces manuels

Pas de commentaire

HP PROCURVE 2520 Manuel d'utilisateur Page 401

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel HP PROCURVE 2520