HP PROCURVE 3400CL-24G Manuel d'utilisateur télécharger pdf (Page 16)

Software Management

Install Recommendations for I.08.12 Boot ROM Update

When installing the M.10.17 software to load the I.08.12 ROM version, ProCurve recommends that

you use the “fastboot” feature and the “reload” command after updating to M.10.17, as shown below.

ProCurve3400cl#config

ProCurve3400cl(config)# fastboot

ProCurve3400cl(config)# copy tftp flash <ip address of tftp server> M_10_17.swi

The Primary OS Image will be deleted, continue [y/n]? y Validating and Writing System

Software to FLASH...

ProCurve3400cl(config)# reload

Device will be rebooted, do you want to continue [y/n]? y

Rebooting the System

Then reconnect and run the show flash command:

ProCurve3400cl# show flas

Image Size(Bytes) Date Version

----- ---------- -------- -------

Primary Image : 3576793 09/26/06 M.10.17

Secondary Image : 3506627 05/26/06 M.10.07

Boot Rom Version: I.08.12

Current Boot : Primary

Please also refer to “Known Issues” on page 24 for additional information regarding updating to the

M.10.20 software release.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 196 197

Pas de commentaire

HP PROCURVE 3400CL-24G Manuel d'utilisateur Page 16