Hp Smart Storage Administrator Manuel d'utilisateur télécharger pdf (Page 42)

Operations 42

• All existing logical drives in the source array must be in OK state.

• The destination array must have sufficient capacity to hold all logical drives present in the source array.

Setting Auto RAID 0

CAUTION: If you select this option for any logical drives, you will experience data loss for that

logical drive if one physical drive fails. Assign RAID 0 to drives that require large capacity and

high speed, but pose no data safety risk.

Auto Array RAID 0 creates a single RAID 0 volume on each physical drive specified, enabling the user to

select multiple drives and configure as RAID 0 simultaneously. Each array contains one physical drive and

one RAID 0 logical drive.

For more information about RAID 0, see "RAID 0—No fault tolerance (on page 109)."

To create an array with RAID 0:

1. Open HP SSA.

For more information, see "Using the HP SSA GUI (on page 16)."

2. Select the controller.

3. Click Create Arrays with RAID 0.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 126 127

Pas de commentaire

Hp Smart Storage Administrator Manuel d'utilisateur Page 42