Hp 2120 Disk System Manuel d'utilisateur télécharger pdf (Page 11)

HP StorageWorks Disk System 2120

English

Power Connector

FIGURE 6

AC Power Connector Location

Electrical Requirements

AC Site Requirements

Overcurrent protection devices are required for each cabinet where the disk system is

installed. They must be positioned between the power source and the disk system.

These protective devices must not trip when exposed to an inrush current of 30 amps

lasting 5 ms.

Note These protection devices must meet all applicable electrical safety

requirements and be approved for the intended purpose.

TABLE 3 AC Power Requirements

Electrical Element Requirements

Voltage 100-240 VAC

Frequency 50-60 Hz

Input Current 1.7-0.7 amp*

Maximum Surge Current 30 amps peak

* Depending on voltage. Confirm through measurement.

Power

Connector

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Pas de commentaire

Hp 2120 Disk System Manuel d'utilisateur Page 11