Hp 2120 Disk System Manuel d'utilisateur télécharger pdf (Page 28)

HP StorageWorks Disk System 212028

STM Disk Information: MPE/iX 6.5 or Later

STM displays the last-generated Information Log for a selected disk. Start STM and

run the Information tool as follows.

1 Log on the system.

2 At the system prompt (:), type vsclose <physical volume number>. This removes

the disk from use.

3 At the system prompt (:), type cstm. STM starts.

4 At the cstm prompt, type map. STM displays a list of all the disks installed on the

system.

5 Select the desired disk by typing select device <number>; for example, select

device 15.

6 Type information. STM updates the system map.

7 To display the information log, type infolog. A sample information log is shown

in Figure 16.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 37 38

Pas de commentaire

Hp 2120 Disk System Manuel d'utilisateur Page 28