Hp MPX200 Multifunction Router Manuel d'utilisateur télécharger pdf (Page 39)

Example

c:\>rcli modify notification -name="my profile" -event=dm_all -http

/ip=10.0.0.12

Notification "my profile" successfully modified

ping system

The ping system command issues a ping through either the management port or one of the GbE

ports.

Syntax

ping system -ping_ipaddr=IPv4 or IPv6 address

Keywords

Specifies the ping packet size in bytes.-packet_size=

The default value is 56.

Specifies the outbound port either as a number for an Ethernet port, or as mgmt for

the management port.

-port=

The default is to use the management port.

Example

c:\> rcli ping system -port=mgmt -ping_ipaddr=10.0.0.11 /ip=10.0.0.12

Reply from 10.0.0.11, time = 1 ms

reboot system

The reboot system command restarts the firmware program in the router.

Syntax

reboot system

Example

c:\> rcli reboot system /ip=10.0.0.12

[10.0.0.12]

Router is restarting...

The register system command

Syntax

ping system 39

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 119 120

Pas de commentaire

Hp MPX200 Multifunction Router Manuel d'utilisateur Page 39