Hp StorageWorks 2405 Disk System Manuel d'utilisateur télécharger pdf (Page 64)

64 Installation

Step 4: Configure LCCs

The disk system comes with two LCCs installed.

If you are connecting this disk system to an HP StorageWorks Virtual Array 7400

or to a 1 Gb/s hub, the link speed switch must be set to 1 Gb/s.

1 Attach your ESD strap to ground.

2 Remove the LCC from the disk system chassis.

Caution Do not touch the pins on the back of the LCC.

3 Set internal configuration dip switch to appropriate link speed.

Be sure to set the internal LCC data transmission speed switch to 1

Gb/s or 2 Gb/s as appropriate for your configuration. See Figure 2.29

for more detailed information.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 143 144

Pas de commentaire

Hp StorageWorks 2405 Disk System Manuel d'utilisateur Page 64