HP Smart Array (RAID) Host Bus Adapters Manuel d'installation télécharger pdf (Page 28)

Creating a logical drive

1. At the ORCA main menu, select Create Logical Drive.

2. Select the physical disks to be included in the logical drive in the Available Physical Drives

section.

3. To select the Raid Configurations section and select the RAID type for the logical drive, press

Tab.

4. To select the Spare section and assign spare disks, as needed, press Tab.

5. To create the logical drive, press Enter. A summary of your choices appears.

6. To save the configuration, press F8.

7. To acknowledge that the configuration was saved and return to the ORCA Main Menu, press

Enter.

Deleting a logical drive

WARNING! Back up all necessary data before deleting the logical drive. When you delete a

logical drive, data on the drive is not preserved.

28 Installing, verifying, and configuring the controller

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

HP Smart Array (RAID) Host Bus Adapters Manuel d'installation Page 28