HP ElitePad 1000 G2 Tablet Manuel d'utilisateur télécharger pdf (Page 30)

19. Release the ZIF connector (4) to which the LVDS cable is attached, and then disconnect the LVDS cable

(5) from the system board.

20. Remove the display assembly and cables.

21. If it is necessary to replace the display assembly cables:

a. Turn the display assembly upside down, with the bottom toward you.

b. Detach the TouchScreen cable (1) from the surface of the display assembly. (The TouchScreen

cable is attached to the display assembly with double-sided adhesive.)

c. Release the ZIF connector (2) to which the TouchScreen cable is attached, and then disconnect the

TouchScreen cable (3) from the display assembly.

d. Detach the display LVDS cable (4) from the surface of the display assembly. (The display LVDS

cable is attached to the display assembly with double-sided adhesive.)

24 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 72 73

Pas de commentaire

HP ElitePad 1000 G2 Tablet Manuel d'utilisateur Page 30