HP ElitePad 1000 G2 Tablet Manuel d'utilisateur télécharger pdf (Page 31)

e. Release the ZIF connector (5) to which the display LVDS cable is attached, and then disconnect the

display LVDS cable (6) from the display assembly.

The TouchScreen and display LVDS cables are included in the Display Cable Kit, spare part number

718758-001.

To install the display assembly:

1. Reconnect the display LVDS and TouchScreen cables to the respective ZIF connectors on the display

assembly.

2. Toe the left side of the display assembly into the left side of the bottom case.

3. Swing the right side of the display assembly down into the right side of the bottom case.

4. Firmly press all edges of the display assembly surface to ensure it is fully engaged with the

bottom case.

Tablet component replacement procedures 25

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 72 73

Pas de commentaire

HP ElitePad 1000 G2 Tablet Manuel d'utilisateur Page 31