HP Web Jetadmin Software Manuel d'utilisateur télécharger pdf (Page 25)

7. Change the <value>xxx.xxx.xxx.xxx</value> entry to the correct server IP address.

8. Select File > Save

9. Start the HPWJA service by using Windows Service Control Manager.

HP Web Jetadmin now uses the specied IP address with reference to the HTTP or web services.

Congure the Port for Event Notications

HP Web Jetadmin directs clients to a TCP connection to receive event notications. After the client establishes

the TCP connection, HP Web Jetadmin sends e

vent notications that prompt the client to update itself via the

standard Microsoft .NET Remoting channel on port 4088. The HP Web Jetadmin server communicates the port

number that is established for event notications to the client when the client rst establishes a connection to

the HP Web Jetadmin server. The port number that HP Web Jetadmin communicates to the client is somewhat

random, which might cause a problem if a rewall is congured on the HP Web Jetadmin server.

If a rewall is

congured on the HP Web Jetadmin server, the event notication port must be set to static and the

rewall must be congured to accept connections through this port. If a rewall is congured on the client, the

rewall on the client does not have to be congured to launch the client.

Use the following steps to congure a static port for event notications:

CAUTION: Be careful when restarting the HP Web Jetadmin service. Critical tasks might be running and clients

might be logged in to HP Web Jetadmin. T

o view the running tasks, go to Application Management > Overview >

Application Management - Active Tasks. To view the clients that are logged in, go to Application Management >

Overview > Client Management - Active Clients.

1. Use Notepad or a similar editor to create a le that contains the following XML section:

<ipmc:configuration

xmlns:ipmc="www.hp.com/schemas/imaging/ipmc/config/2004/02/24">

<type>HP.Imaging.Wjp.Sdk.Core.Framework.ConfigurationItemString

</type>

</property>

</ipmc:configuration>

The por

t number specied for the <value> attribute can be any unused port.

2. From the

File menu, select Save.

3. On the Save As

window, navigate to the following directory on the HP Web Jetadmin server:

C:\Windows\ServiceProles\NetworkService\AppData\Local\HP Inc\HPWebJetadmin\WjaService\cong

4. In the File name

box, enter Global.config.xml, and then click the Save button.

5. Restart the HP Web Jetadmin service (HPWJAService). For instructions, see Restart the HP Web Jetadmin

Service Manually on page 22.

6. Use any rewall application or a similar application to open the port.

ENWW Deploy the Smart Client 21

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 36 37

Pas de commentaire

HP Web Jetadmin Software Manuel d'utilisateur Page 25