HP 4540s Spécifications télécharger pdf (Page 138)

To start Advanced System Diagnostics:

1. Turn on or restart the computer. While the “Press the ESC key for Startup Menu” message is

displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed,

press f2.

2. Click the diagnostic test you want to run, and then follow the on-screen instructions.

NOTE: If you need to stop a diagnostics test while it is running, press esc.

SUSE Linux – Computer Setup (BIOS) and Advanced

System Diagnostics

Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input

and output devices on the system (such as disk drives, display, keyboard, mouse, and printer).

Computer Setup includes settings for the types of peripherals installed, the startup sequence of the

computer, and the amount of system and extended memory.

NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the

computer from operating properly.

Starting Computer Setup

NOTE: An external keyboard or mouse connected to a USB port can be used with Computer Setup

only if USB legacy support is enabled.

To start Computer Setup, follow these steps:

1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

2. Press f10 to enter Computer Setup.

Using Computer Setup

Navigating and selecting in Computer Setup

To navigate and select in Computer Setup, follow these steps:

1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

●

To select a menu or a menu item, use the tab key and the keyboard arrow keys and then

press enter, or use a pointing device to click the item.

●

To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the

screen, or use the up arrow key or the down arrow key.

●

To close open dialog boxes and return to the main Computer Setup screen, press esc, and

then follow the on-screen instructions.

NOTE: You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the

keyboard to navigate and make selections in Computer Setup.

2. Press f10 to enter Computer Setup.

130 Chapter 5 Computer Setup (BIOS) and Advanced System Diagnostics

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 173 174

Pas de commentaire

HP 4540s Spécifications Page 138