HP Chromebook 14-q032ef Manuel d'utilisateur télécharger pdf (Page 62)

Reverse this procedure to install the heat sink.

Solid-state drive

Description Spare part number

32 GB 740159-001

16 GB 740158-001

Before removing the solid-state drive, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the keyboard/top cover (see

Keyboard/top cover on page 23), and then remove the

following components:

a. Speakers (see

Speakers on page 26)

b. Battery (see

Battery on page 28)

c. WLAN module (see

WLAN module on page 32)

d. Hall sensor board (see

Hall sensor board on page 39)

e. System board (see

System board on page 52)

Remove the solid-state drive:

1. Turn the system board upside down, with the rear toward you.

2. Remove the Phillips PM2.0×2.5 (1) that secures the solid-state drive to the system board. (The

solid-state drive tilts up.)

56 Chapter 4 Removal and replacement procedures preliminary requirements

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68 69 70

Pas de commentaire

HP Chromebook 14-q032ef Manuel d'utilisateur Page 62