1-1CD-ROM Drive F1197Afor the HP OmniBookUser’s Guide
1-10Connecting Several SCSI DevicesBecause the CD-ROM drive is a SCSI device, it is possible to connect it to yourOmniBook in series with other SCSI d
1-11To disconnect and reconnect the CD-ROM drive 1. If you are using Windows 95, click Start, Eject PC. (This removes the OmniBookfrom its “docked” co
1-12To insert a CD into the CD-ROM drive 1. Press OPEN to open the disk cover. 2. Place a CD (with the label facing up) on the center spindle, and pre
1-13To remove a CD from the CD-ROM drive 1. Make sure the blinking “Busy” message does not appear on the CD-ROM drivedisplay. If “Busy” appears, stop
1-14To play an audio CDBefore playing an audio CD, make sure the volume control is set to below 4 to avoidoverly loud output. 1. Insert the CD into th
1-15MaintenanceTo clean the CD-ROM driveYou should periodically clean your CD-ROM drive, inside and out. Do not usesolvents or commercial lens cleaner
1-16TroubleshootingTroublePossible Cause s/SolutionsThe POWER switch is ON, butnothing appears on theCD-ROM display.The power cable is not plugged int
1-17SpecificationsPower Source:See the nameplate on the bottom of the unit.Interface:SCSI I, II.Buffer Size:128 KB.Operating Temperature:5 °C (41 °F)
1-18Regulatory InformationThis section presents information that shows how the CD-ROM drive complies withregulations in certain regions. Any modificat
1-19JapanLaser SafetyThis CD-ROM drive is certified as a Class 1 laser device according to the U.S.Department of Health and Human Services (DHHS) Radi
1-2NoticeThis manual and any examples contained herein are provided “as is” and aresubject to change without notice. Hewlett-Packard Company makes no
1-20EuropeProducts sold in Europe by Hewlett-Packard and its authorized dealers meet thespecifications listed below.Declaration of Conformity (accordi
1-3ContentsOverview ... 1-4Features... 1-4Precautions...
1-4OverviewThe lists below summarize important information about your CD-ROM drive.FeaturesThe CD-ROM drive for the HP OmniBook: • Connects to your Om
1-5Setting Up Your CD-ROM DriveWARNINGTo prevent fire or shock hazard, do not expose this product to rain or anyother type of moisture.This CD-ROM dri
1-6To use batteries in your CD-ROM driveAlkaline batteries are recommended. 1. Open the battery cover by sliding it out and lifting it up. 2. Insert s
1-7To connect the CD-ROM drive to your OmniBookCAUTIONBefore you turn on the CD-ROM drive for the first time, remove the cardboardshipping insert from
1-8 4. Important : the CD-ROM drive must be on when the cable connects the driveand the computer in order for the computer to register the presence
1-9 In the Confirm Device Removal box, enableRemove from specific configuration.Under Configuration, select Undocked, then click the OK button.To tur
Commentaires sur ces manuels