HP ZBook 17 G2 Mobile Workstation Manuel d'utilisateur télécharger pdf (Page 64)

Optical drive

NOTE: The Upgrade Bay supports both optical drives and hard drives. If you switch from a hard drive to an

optical drive in the Upgrade Bay, you will need to remove four additional screws that secure the hard drive

carrier.

NOTE: All optical drive spare part kits include bezel, bracket, and screws.

Description Spare part number

Blu-ray R/RE DVD±RW SuperMulti Double-Layer Drive 735600-001

Blu-ray ROM DVD±RW SuperMulti Double-Layer Drive 735599-001

DVD±RW SuperMulti Double-Layer Drive 735602-001

Before removing the optical drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 41).

5. Remove the service cover (see Service cover on page 43).

Remove the optical drive:

1. Position the computer with the front toward you.

2. Loosen the Phillips captive screw (1) that secures the optical drive to the computer.

3. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the tab to

the left to release the optical drive from the computer.

52 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 170 171

Pas de commentaire

HP ZBook 17 G2 Mobile Workstation Manuel d'utilisateur Page 64