HP ZBook 17 G2 Mobile Workstation Manuel d'utilisateur Page 87

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 124
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 86
10 Maintenance
Adding or replacing memory modules
The computer has one memory module compartment. The capacity of the computer can be upgraded by
adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory
module in the primary memory module slot.
NOTE: Before adding or replacing a memory module, be sure the computer has the most recent BIOS
version, and update the BIOS if needed. See
Updating the BIOS on page 91.
CAUTION: Failure to update the computer to the latest BIOS prior to installing or replacing a memory
module may result in various system problems.
WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and
remove all batteries before installing a memory module.
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any
procedure, ensure that you are discharged of static electricity by touching a grounded metal object.
CAUTION: To prevent information loss or an unresponsive system:
Shut down the computer before adding or replacing memory modules. Do not remove a memory module
while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power
button. Then shut down the computer through the operating system.
NOTE: To use a dual-channel configuration when adding a second memory module, be sure that both
memory modules are identical.
NOTE: The primary memory is located in the bottom memory slot and the expansion memory is located in
the top memory slot.
To add or replace a memory module:
1. Save your work and shut down the computer.
2. Disconnect AC power and external devices connected to the computer.
3. Remove the battery (see Removing a battery on page 48).
4. Remove the service door (see
Removing the service door on page 62).
5. If you are replacing a memory module, remove the existing memory module:
ENWW Adding or replacing memory modules 77
Vue de la page 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 123 124

Commentaires sur ces manuels

Pas de commentaire