HP 4400 Informations techniques télécharger pdf (Page 93)

7. Clean only the copper-colored contacts. Allow the print cartridges to dry for

approximately ten minutes.

1 Copper-colored contacts

2 Ink nozzles (do not clean)

8. Hold the print cartridge with the HP logo on top, and insert the print cartridge back

into the slot. Make sure you push the print cartridge in firmly until it snaps into

place.

9. Repeat if necessary for the other print cartridge.

10. Gently close the print cartridge door and plug the power cord into the back of the

product.

Cause: The print cartridge contacts needed to be cleaned.

If this did not solve the issue, try the next solution.

Solution 3: Replace the print cartridges

Solution: Replace the indicated print cartridge. You can also remove the indicated

print cartridge and print using ink-backup mode.

NOTE: During ink-backup mode, the product can only print jobs from the

computer. You cannot initiate a print job from the control panel (such as printing

a photo from a memory card).

Chapter 8

90 Solve a problem

Solve a problem

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 112 113

Pas de commentaire

HP 4400 Informations techniques Page 93