HP 5300 Guide d'installation télécharger pdf (Page 13)

HP ProCurve Switch xl Modules

Installing the Modules

Overview

Before installing any module, ensure you have loaded the most current

software for that module onto your switch, see page 2 for module software

codes. You can install any of the modules into any of the HP ProCurve xl

Switches that have a compatible module slot. As of this printing, those are the

HP ProCurve Series 5300xl Switches:

■ 5308xl (p/n J4819A)

■ 5372xl (p/n J4848B)

■ 5348xl (p/n J4849B)

■ 5304xl (p/n J4850A)

“Hot Swap”

Notes

The mini-GBICs can be “hot swapped”. That is, they can be installed or

removed after the mini-GBIC xl Module is installed in the switch and the

module is receiving power, see page 10.

You can “hot-swap” one module for another; that is, replace one module with

another while the switch is still powered on, without interrupting the opera-

tion of the rest of the switch ports, see page 24. You may have to reconfigure

the switch if the modules are not the same type, check your configuration.

You can install the modules into the switch either with the switch powered on

or off. The following procedures assume the switch is powered on.

1. Install the modules in a switch slot (page 8).

If you have installed any modules into slots that were previously occupied

by a different type module, you need to reset the switch (page 25).

2. If you are using the mini-GBIC xl Module, install the mini-GBICs in the

module. You can install the mini-GBICs before or after installing that

module into the switch (page 10).

3. Optionally, connect an HP ProCurve 600 Redundant and External Power

Supply to the xl PoE EPS input, using the supplied EPS cable (page 11).

4. Verify the modules are installed correctly (page 17).

5. Connect the network cabling (page 18).

6. Verify the network connections are working properly (page 21).

7. Optionally, customize the configuration for the modules’ ports (unless

the default port configuration is satisfactory for your network application

(page 22)).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Pas de commentaire

HP 5300 Guide d'installation Page 13