HP 5300 Spécifications télécharger pdf (Page 73)

B-1

Switch Ports and Network

Cables

Switch Ports and Network Cables

This appendix includes switch connector information and network cable

information for cables that should be used with the Series 5300xl Switches,

including minimum pin-out information and specifications for twisted-pair

cables.

Note Incorrectly wired cabling is the most common cause of problems for LAN

communications. HP recommends that you work with a qualified LAN cable

installer for assistance with your cabling requirements.

Switch Ports

Twisted Pair

■ The RJ-45 ports on the 10/100-TX xl Module and the 100/1000-T xl

Module accept 100-ohm differential unshielded and shielded twisted-pair

cable with RJ-45 connectors as described on the next page.

Fiber-Optic

■ The LC-type connector port on the Gigabit-SX mini-GBIC transmits at

850 nm wavelength, and accepts the low metal content, multimode fiber-

optic cables for Gigabit-SX described on page B-3.

■ The LC-type connector port on the Gigabit-LX and LH mini-GBIC

transmits at 1310 nm wavelength, and accepts the low metal content,

single-mode or multimode fiber-optic cables for Gigabit-LX described on

page B-3.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 99 100

Pas de commentaire

HP 5300 Spécifications Page 73