HP Integrity rx2600 Spécifications télécharger pdf (Page 68)

68 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide

Removing and Replacing Components

Removing the Front Bezel

You must remove the front bezel from the chassis to upgrade, remove, or replace the power

supplies or the optical drive.

To remove the front bezel, follow these steps:

1. Firmly grasp the finger grip at the top of the bezel and pull forward until the bezel snaps

open.

2. Lift the bezel off of the chassis.

Replacing the Front Bezel

To replace the front bezel, follow these steps:

1. Insert the bezel’s latches into the matching slots on the server chassis.

2. Close the bezel and push toward the front of the server until it snaps into place.

Aligning the Front Bezel

Rack-Mount Server

To access the internal components on a rack-mounted server, pull the server out on the rail guides

and remove the top cover.

Removing the Top Cover on a Rack-Mount Server

To remove the top cover, follow these steps:

1. Power off the server and disconnect the power cable and all other cables from the back of the

server.

NOTE: If you are removing only a hot-swappable system fan or a hot-plug hard drive, you can

leave the server on and the power cables connected.

2. Release the rack latches by rotating them outward.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 165 166

Pas de commentaire

HP Integrity rx2600 Spécifications Page 68