Hp 8.20q Fibre Channel Switch Manuel d'utilisateur Page 21
- Page / 114
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
HP SN6000 Fibre Channel Switch QuickTools Switch Management User Guide 21
The local fabric may consist of one or multiple HP SN6000 Fibre Channel Switches connected by their
ISLs. A specific device attached to an HP SN6000 Fibre Channel Switch can be mapped with one or more
devices in one remote fabric over only one TR_Port on that HP SN6000 Fibre Channel Switch. If a device
attached to an HP SN6000 Fibre Channel Switch is mapped with multiple devices in the same remote
fabric, the same TR_Port must be used.
A device attached to a remote fabric can be mapped with multiple devices in multiple local fabrics. If a
device in a remote fabric is mapped with multiple devices in the local fabric attached to a given HP
SN6000 Fibre Channel Switch, the same TR_Port on the HP SN6000 Fibre Channel Switch must be used
for all mappings involving that remote device. However, the same remote device can be mapped with
other local devices attached to a different HP SN6000 Fibre Channel Switch in the same local fabric over
a TR port from that switch. A remote device can be mapped through more than one TR port, as long as
each of those TR ports is on a different HP SN6000 Fibre Channel Switch.
Furthermore, you cannot map a local device to a remote device over an E_Port to another local switch and
then over a TR_Port to the remote switch. The transparent route cannot include an E_Port on the local fabric.
Local devices will not discover remote devices until the corresponding inter-fabric zones are activated on
both the local and remote fabrics. To remove a mapping, in addition to removing the local inter-fabric
zone, you must also remove the corresponding remote inter-fabric zone.
NOTE: When a local device is mapped over a TR_Port to a remote device, the local device and its
TR_Port appear as an NPIV connected device in the remote fabric. It is possible, though not recommended,
to map such a local device over a second TR_Port to a local device in a second local fabric. In this case, if
you merge the two local fabrics, the transparent route becomes inactive for the devices that now have a
path over an ISL, and an alarm is generated.
For details of switches supported in a remote fabric, see release notes for the HP SN6000 Fibre Channel
Switch, and the HP SAN Design Reference Guide on the HP website
http://www.hp.com/go/sandesignguide. A user (admin rights required) can configure TR mappings to
connect devices on the local HP SN6000 Fibre Channel Switch fabric with devices on remote fabrics.
The transparent route between these devices is accomplished by connecting a remote switch to a TR_port
on the HP SN6000 Fibre Channel Switch, mapping the devices together, and then creating and activating
the IFZ (inter-fabric zones) in both fabrics. Each fabric will contain a matching IFZ. Each IFZ must contain
exactly three WWN members: the local device, the remote device, and the TR_Port attached to the remote
fabric.
NOTE: Be sure to configure the TR_Port before connecting the remote fabric to the HP SN6000 Fibre
Channel Switch. If the remote fabric is connected to a port on the HP SN6000 Fibre Channel Switch that is
not a TR_Port, the two fabrics may establish an E_Port connection and the local and remote fabrics may
merge. This mixed fabric is not a supported configuration. If the port type is changed to TR_Port after
connecting the remote fabric, a port reset may be required to completely establish the TR connection.
A TR_Port is used as a bridge between the transparent router’s local fabric and a remote fabric. A TR_Port
uses standard NPIV login methods to attach to the remote fabric. For remote B-series or C-series fabrics, the
switch to which the TR_Port connects must support N-Port ID Virtualization (NPIV) and for B-series fabrics the
interoperability mode must be configured to InteropMode=0. The TR_Port logs into the remote fabric using
the WWN of the TR_Port. The TR_Port accesses fabric services of the remote fabric, such as Name Server
and Management Server, and may receive registered state change notifications (RSCNs). The TR_Port uses
FDISCs to login proxies for devices attached to an N_Port on the HP SN6000 Fibre Channel Switch. Any of
the HP SN6000 Fibre Channel Switch 8Gb ports may be configured as a TR_Port.
- Switch Management User Guide 1
- Contents 3
- 1 Using QuickTools 9
- Opening QuickTools 10
- QuickTools user interface 11
- Fabric tree 12
- Graphic window 12
- Data windows and tabs 12
- Alerts panel 13
- Menu bar 14
- Selecting switches 16
- Selecting ports 16
- Using online help 18
- Viewing the software version 18
- Exiting QuickTools 18
- 2 Managing Fabrics 19
- Replacing a failed switch 20
- Transparent router 20
- TR Mapping Manager dialog 22
- Add TR Mapping dialog 23
- Remote Fabric Zoning dialog 24
- Event Browser 27
- Filtering the Event Browser 29
- Sorting the Event Browser 29
- Devices data window 30
- Creating a nickname 32
- Editing a nickname 32
- Deleting a nickname 32
- Active Zoneset data window 33
- Zoning concepts 34
- Zoning database 35
- Managing the zoning database 36
- Editing the zoning database 37
- Options for resolving zoning 39
- Default Zone 40
- Discard Inactive 40
- Managing zone sets 41
- Managing zones 42
- Copying a zone to a zone set 43
- Adding zone members 43
- Renaming a zone 44
- Removing a zone member 44
- Managing aliases 45
- Merging fabrics and zoning 46
- Zone merge failure 46
- Zone merge failure recovery 46
- 3 Managing Switches 47
- Stack Links data window 52
- Managing switch stacks 53
- Managing user accounts 54
- Creating user accounts 55
- Removing a user account 56
- Paging a switch 58
- Resetting a switch 60
- Configuring a switch 60
- Switch properties 61
- Symbolic name 62
- Switch administrative states 62
- Broadcast support 62
- In-band management 62
- Advanced switch properties 63
- Managing system services 64
- Network properties 65
- Network DNS configuration 67
- SNMP configuration 68
- SNMP v3 Security 70
- Adding an SNMP v3 user 71
- Modifying an SNMP v3 user 72
- Removing an SNMP v3 user 72
- Testing a switch 73
- Archiving a switch 74
- Restoring a switch 75
- Downloading a support file 79
- Installing firmware 79
- Using Call Home 81
- Testing Call Home Profiles 89
- Change Over 89
- 4 Managing Ports 91
- Port Statistics data window 94
- Viewing and configuring ports 97
- Port symbolic name 98
- Port states 98
- Port administrative states 99
- Port types 100
- Port speeds 100
- Port transceiver media status 101
- Resetting a port 102
- Testing ports 103
- 5 Support and Other Resources 105
- Subscription service 106
- Documentation feedback 106
- Contacting HP 106
- Related information 107
- Glossary 109
Produits connexes et manuels pour Stockage Hp 8.20q Fibre Channel Switch
(70 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.456 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels