Hp e-CommerceXML Accelerator sa7150 Manuel d'utilisateur Page 145

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 212
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 144
C H A P T E R 7 Alarm Types
135
UTL:
Utilization
Threshold
Alarm
This alarm monitors three utilization threshold values:
CPU
Connections per Second
Total Open Connections.
When enabled, an alarm is issued whenever any of the utilization
values exceeds its high-water mark, or, having exceeded the high-
water mark, drops below the low-water mark. The user defines the
high and low-water marks. By default, the high-water mark is 90%
and the low-water mark is 60%.
The data collected for utilization threshold metrics tends to be bursty,
so a smoothing algorithm is used to prevent continuous alarms. The
utilization window is a user-specified sliding interval during which
data is collected and averaged. Consequently, shorter intervals are
likely to result in some extraneous alarms. The interval can be set
from 5 to 65000 seconds (default: 15).
Format:
A:mm/dd/yyyy hh:mm:ss:
UTL:ALRT|NMRL:CPU|CON|CPS:/*message*/
Where:
A: identifies the message as an alarm.
mm/dd/yyyy hh:mm:ss: is the timestamp.
UTL: identifies the message as an
Utilization Threshold Alarm.
Alarm Modifiers and Messages
ALRT: Message: [CPU|Open connections|CPS]
exceed high water mark
NMRL: Message: [CPU|Open connections|CPS]
drop below low water mark
Extended Data
CPU: Indicates that CPU Utilization
triggered the alarm.
CON: Indicates that Total Active Connections
triggered the alarm.
CPS: Indicates that Connections per Second
triggered the alarm.
Vue de la page 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 211 212

Commentaires sur ces manuels

Pas de commentaire