Hp Integrity NonStop H-Series Manuel d'utilisateur télécharger pdf (Page 23)

Operation

M8705A Tape Drive Installation and User’s Guide—694638-001

4-9

LTO Cartridge Media

Ultrium tape cartridges have a recessed area located on the face of the cartridge next

to the write-protect switch. Use this area for attaching the adhesive-backed bar code

label. Only apply labels as shown:

Operating and Storage Environment

To prevent condensation and for long life, the cartridge should only be operated or

stored as follows:

Operation: 10° C to 45° C (50° F to 113° F)

Day-to-day storage (in plastic container): 16° C to 32° C (60° F to 90° F)

Non-condensing relative humidity: 10% to 80% (operating), 20% to 60% (non-

operating)

Wet bulb temperature should not exceed 26° C (79° F)

Tapes intended for long-term storage should be stored in the plastic containers, at

temperatures between 5° C and 23° C (41° F and 73° F) and 20% to 60% relative

humidity.

Figure 4-6. Tape Labeling

IMPORTANT: The bar code label should only be applied as shown, with the alphanumeric

portion facing the hub side of the tape cartridge. Never apply multiple labels onto a cartridge

because extra labels can cause the cartridge to jam in a tape drive.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

Pas de commentaire

Hp Integrity NonStop H-Series Manuel d'utilisateur Page 23