Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 23)

4 Accessory Boards

The HP NetServer accepts PCI and ISA accessory boards connected to the I/O

Board. An accessory board can be identified by the offset of the bracket and the

shape of the edge connector (see Figure 4-1).

PCI Board- Left-Side Offset

ISA Board- Right-Side Offset

Figure 4-1. I/O Board with Devices and Bus Structure

The I/O Board

The I/O board is located under cover 1 and is shown in Figure 4-2. The I/O board

contains:

• The Remote Management connector, linking the I/O board to the external

connector on the rear panel.

• The I/0 Memory slot, which contains cache memory used by the Intel

i960RD I/O processor.

• The SE SCSI connector, which services any single-ended SCSI device

installed in the internal (non-hot-swap) trays.

• The PCI Board slots, which are eight connectors that accept PCI boards.

• The ISA Board slot, which accepts a single ISA board. This slot is shared

with PCI slot 1. Either slot can be occupied, but not both.

• The two SCSI connectors, A and B.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 125 126

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 23