Hp Netserver L Server series Manuel d'utilisateur télécharger pdf (Page 57)

Chapter 6 Installing Additional Boards

NOTE If you ever choose to remove one of the processor boards and

run the HP NetServer with fewer processors, a terminator

board must be installed in place of the processor board.

• HP Navigator CD-ROM. You are not required to use the HP Navigator

CD-ROM to reconfigure your system after installing the new processor

board. However, we recommend that you use it to ensure that you have the

latest drivers and information.

Figure 6-3. 200 MHz/1MB Processor Board

Tools Required

• An antistatic service kit (3M

8501/8502/8503 or equivalent). This kit

includes a static-dissipating work surface, a chassis clip lead, and a wrist

strap.

• Number 1 Phillips head screwdriver.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 146 147

Pas de commentaire

Hp Netserver L Server series Manuel d'utilisateur Page 57