Hp ProLiant BL465c G7 Server-Blade Manuel d'utilisateur télécharger pdf (Page 37)

Hardware options installation 37

CAUTION: Any attempt to remove an installed TPM from the system board breaks or

disfigures the TPM security rivet. Upon locating a broken or disfigured rivet on an installed

TPM, administrators should consider the system compromised and take appropriate measures

to ensure the integrity of the system data.

5. Install the TPM board. Press down on the connector to seat the board ("System board components"

on page 8).

6. Install the TPM security rivet by pressing the rivet firmly into the system board.

7. Install the access panel (on page 15).

8. Install the server blade ("Installing a server blade" on page 18).

9. Power up the server blade (on page 13).

Retaining the recovery key/password

The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after

BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery

key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of

system integrity.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 97 98

Pas de commentaire

Hp ProLiant BL465c G7 Server-Blade Manuel d'utilisateur Page 37