Hp ProLiant DL320e Gen8 v2-Server Manuel d'utilisateur télécharger pdf (Page 18)

Operations 18

Close the access panel latch. The access panel slides to a closed position.

3. Use a T-15 Torx screwdriver to tighten the access panel latch screw.

Remove the air baffle

CAUTION: For proper cooling, do not operate the server without the access panel, baffles,

expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize

the amount of time the access panel is open.

1. Power down the server (on page 14).

2. Remove the power from the server:

a. Disconnect the power cord from the power source.

b. Disconnect the power cord from the server.

3. Do one of the following:

o Extend the server from the rack (on page 14).

o Remove the server from the rack (on page 16).

4. Remove the access panel (on page 17).

5. Remove the air baffle.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 99 100

Pas de commentaire

Hp ProLiant DL320e Gen8 v2-Server Manuel d'utilisateur Page 18