Hp ProLiant DL320e Gen8 v2-Server Manuel d'utilisateur télécharger pdf (Page 28)

Setup 28

To secure the cable tie, loop the end through the plastic buckle on the other end.

c. To secure the power cord, repeat steps a and b, using the other cable tie.

When multiple cable ties are used in the same rack, stagger the cable tie location, so that the ties are

adjacent to each other when viewed from top to bottom. This positioning will enable the rack rail to slide

easily in and out of the rack.

Powering on and selecting boot options

1. Connect the Ethernet cable.

2. Press the Power On/Standby button.

3. During the initial boot:

o To modify the server configuration ROM default settings, press F9 when prompted from the start up

sequence to enter the RBSU. By default, RBSU runs in the English language.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 99 100

Pas de commentaire

Hp ProLiant DL320e Gen8 v2-Server Manuel d'utilisateur Page 28