Hp ProLiant DL320e Gen8 v2-Server Manuel d'utilisateur télécharger pdf (Page 35)

Hardware options installation 35

For more information about product features, specifications, options, configurations, and compatibility, see

the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).

Drive installation guidelines

When adding drives to the server, observe the following general guidelines:

• The system automatically sets all device numbers.

• Populate drive bays, based on the drive numbering sequence. Start from the drive bay with the lowest

device number ("Drive numbering" on page 11).

• When drives are grouped together into the same drive array, they must be of the same capacity to

provide the greatest storage space efficiency.

Installing a non-hot-plug drive

To install the component:

1. Power down the server (on page 14).

2. Remove the power from the server:

a. Disconnect the power cord from the power source.

b. Disconnect the power cord from the server.

3. Remove the drive carrier.

4. Remove the two metal brackets from the drive carrier.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 99 100

Pas de commentaire

Hp ProLiant DL320e Gen8 v2-Server Manuel d'utilisateur Page 35