Hp ProLiant DL360p Gen8 Server Manuel d'utilisateur télécharger pdf (Page 21)

Operations 21

WARNING: To reduce the risk of personal injury, be careful when pressing the server rail-release

latches and sliding the server into the rack. The sliding rails could pinch your fingers.

5. After performing the installation or maintenance procedure, slide the server into the rack:

a. Slide the server fully into the rack.

b. Secure the server by tightening the thumbscrews.

6. Connect the peripheral cables and power cords.

Remove the server from the rack

To remove the server from an HP, Compaq branded, telco, or third-party rack:

1. Power down the server (on page 20).

2. Extend the server from the rack (on page 20).

3. Disconnect the cabling and remove the server from the rack. For more information, see the

documentation that ships with the rack mounting option.

4. Place the server on a sturdy, level surface.

Access the HP Systems Insight Display

1. Press and release the display.

2. Extend the display from the chassis.

o 8 SFF configuration

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 117 118

Pas de commentaire

Hp ProLiant DL360p Gen8 Server Manuel d'utilisateur Page 21