HP D2600 Manuel d'utilisateur télécharger pdf (Page 12)

Unit identification (UID) button

The unit identification (UID) button helps locate an enclosure and its components. When the UID button

is activated, the UID on the front and rear of the enclosure are illuminated.

NOTE:

A remote session from the management utility can also illuminate the UID.

• To turn on the UID light, press the UID button. The UID light on the front and the rear of the enclosure

will illuminate solid blue. (The UID on cascaded storage enclosures are not illuminated.)

• To turn off an illuminated UID light, press the UID button. The UID light on the front and the rear

of the enclosure will turn off.

Power supply module

Two power supplies provide the necessary operating voltages to all controller enclosure components.

If one power supply fails, the remaining power supply is capable of operating the enclosure. (Replace

any failed component as soon as possible.)

NOTE:

If one of the two power supply modules fails, it can be hot-replaced.

Power supply LED

One LED provides module status information.

DescriptionLED statusLED color

No powerOffOff

Normal, no fault conditionsSolidGreen

Hardware12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Pas de commentaire

HP D2600 Manuel d'utilisateur Page 12