HP J7949E Manuel d'utilisateur télécharger pdf (Page 103)

ENWW Using the Embedded Web Server 103

Other Settings

This item provides access to a variety of management and printing

configuration options. The following tabs are provided:

● Misc. Settings: for enabling miscellaneous advanced protocols

and functions

● Firmware Upgrade: (for print servers that support firmware

upgrades) to update your HP Jetdirect print server with new

features and enhancements

● LPD Queues: for setting up print queues used in printing under

LPD (line printer daemon) printing services

● Support Info: to set up the Support link located under Other

Links in the left margin

● Refresh Rate: to set the time interval (in seconds) for embedded

Web diagnostic page updates

Disable SNMPv1/v2 This option disables the SNMP v1/v2c agents on the print

server, which is recommended for secure environments. If

SNMP v1/v2c is disabled, some port monitors or discovery

utilities may not operate properly.

Enable SNMPv3 (Full-featured HP Jetdirect print servers only) This option

enables (check) or disables (clear) the SNMP v3 agent on

the print server.

When enabled, an SNMP v3 account must be created on

the print server, and the account information must be

implemented on the SNMP v3 management application.

You may create an account by providing the following

information:

User Name: the SNMP v3 account user name.

Authentication Key: a 16-byte hexadecimal value for

authenticating the SNMP packet contents using Message

Digest Algorithm 5 (MD5, RFC 1321) .

Privacy Key: a 16-byte hexadecimal value for encrypting

the data portion of the SNMP packet using the Data

Encryption Standard (DES) algorithm.

Context Name: the view context in which this user can

access SNMP objects. It is always “Jetdirect”.

Table 4.4 SNMP Settings (2 of 2)

Item Description

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 231 232

Pas de commentaire

HP J7949E Manuel d'utilisateur Page 103