HP Compaq 8100 Elite Series Guide de l'utilisateur télécharger pdf (Page 45)

7. Replace the four screws in the bottom of the carrier to hold the drive securely in place.

NOTE: Your computer may look different than the illustration shown below.

Figure 43 Replacing the Security Screws

8. Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and

attach the thermal sensor to the top of the hard drive with the adhesive strip (2).

NOTE: Your computer may look different than the illustration shown below.

Figure 44 Replacing the Thermal Sensor

ENWW Installing and Removing Drives 39

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

Pas de commentaire

HP Compaq 8100 Elite Series Guide de l'utilisateur Page 45