HP Mini 5102 Manuel d'utilisateur télécharger pdf (Page 54)

Before removing the keyboard, follow these steps:

1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device

on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the device.

3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the device.

4. Remove the battery (see

Battery on page 41).

5. If your device has WWAN capability, remove the SIM (see

SIM on page 42).

Remove the keyboard:

1. Remove the 3 Phillips PM2.0×3.0 screws that secure the keyboard to the device.

2. Open the display 90 degrees.

3. Use a tool to push the screw tabs directly down to release the rear edge of the keyboard.

4. Turn the device right-side up, and then lift up on the left and right retention tabs (1) of the keyboard

until the keyboard releases.

46 Chapter 4 Removal and replacement procedures

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 146 147

Pas de commentaire

HP Mini 5102 Manuel d'utilisateur Page 54